1 / 1
Rugged AirTag Key Ring Case with nuts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved version with bottom piece for M3 nuts
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 96
- Wydruki
- 3
- Wyświetlenia
- 369
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix
This is a remixed version with a second bottom part containing hexagon holes for inserting M3 nuts. This makes assembly much easier since the nut is fixed and not rotating when the screws are tightened.
Required Components
- 3x M3x6mm screws
- 3x M3 nuts
Instructions
- Print one set of the included Rugged_AirTag_KeyRing.stl file. I recommend printing it with AirTag opening facing downwards with supports, but it is up to you.
- Insert your AirTag into the opening on one of the printed parts.
- Attach the other printed part using the M3x6mm screws and the M3 nuts.
FUSION360 file is included