QBrick ONE XL containers inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of inserts to Qbrick ONE XL toolbox. It adds an additional level to the containers.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 1632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Set of containers. The naming convention is like “1x_*” - means the insert for the smallest container, “2x_*” - the double one. Then “double” or “triple” in the name means that the insert is divided into 2 or 3 separate spaces. The bit insert is meant to be placed on the bottom of “1x” or “1x_shallow”. It doesn't fit tightly to the container walls, but the bits sit tight, so you can easily pull the entire bit set out of the box.
Prints easily without supports. The bottom and the walls are pretty thick, so it's pretty robust thing.
TIP: If you can't put bits into the bit insert, heat one of them and use it to make a hole a little bit larger.