Thorens TD160 arm rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tested on TD160. The shape is not a direct clone of the original, but a more practical shape for printing.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 764
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tone arm rest for the Thorens TD160 turntable. The shape is not a direct clone of the original, but a more practical shape for FDM printing. The suggested printing orientation on an FDM printer is big flat side down.
There are two 3MF files included, one with a footprint roughly equivalent to the original part, another with additional, slightly angled feet for additional stability.
The part has been printed in PLA and then tested and determined functional on a TD160.
Designed using OpenSCAD version 2022.09.18.ci12165.
Please, always take the necessary safety precautions when messing around with electronics. It's best to leave repairs to professionals, particularly if you have to open a device to do repairs.