1 / 4
LED Teelicht Gehäuse / LED tealight housing — zdjęcie 1
1 / 4

LED Teelicht Gehäuse / LED tealight housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LED Teelicht Gehäuse / LED tealight housing

Ocena
0 / 5
Polubienia
21
Pobrania
153
Wydruki
0
Wyświetlenia
913
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ihr kennt das bestimmt: Ihr habt einen schönen, farbigen Teelichthalter gedruckt, aber nur weiße LED-Teelichter…
Dieses Gehäuse paßt für LED-Teelichter mit einem Außendurchmesser von ca. 37,5mm und einer Höhe von ca. 17mm. Die Außenwände und das Top haben eine Stärke von 1mm, der Ausschnitt für die “Flamme” hat einen Durchmesser von 6,5mm. Der Einsatz des Teelichts kann leicht aus dem originalen Gehäuse herausgenommen und in das neue eingesetzt werden.
Neben der STL-Datei sind auch eine Step- und eine FCStd-Datei dabei, ihr könnt das Teil also bei Bedarf anpassen.

You know that: you have printed a nice coloured tealight holder, but you only have white LED tealights…
This housing is for LED tealights with an outer diameter of 37,5mm and a hight of 17mm. The walls and the top have a thickness of 1mm, the hole for the “flame” has a diameter of 6,5mm. 
STL, Step and FCStd files are included, so you can modify the housing if you want to.

Material: any FDM Material
Layer hight: 0.2mm
Supports: no, print upside down

FCStd, Step, STL

Tagi