Customizable anti-flood dripper holder for automatic watering system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my many potted plants I am using an automated watering system from Gardena, this requires a dripper at the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
For my many potted plants I am using an automated watering system from Gardena, this requires a dripper at the beginning of every water circuit to prevent the law of communicating vessels to empty the water tank. Before I was using water proof duct tape, but this did not scale as I was adding more circuits. This design is customizable, so it can be used for any round water container, only the inner and outer diameter need to be specified, also the number of drippers can be changed as well as the angle of the arc and the dimension of the drippers. I added a stl that should work for most 10l buckets, when you use a different container you can easily change it with Customizer or if it is unstable you can download the scad file and use OpenSCAD that in the latest version also provides a Customizer.
Category: Outdoor & Garden