Customizable Stereographic Skull v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is basically the same as http://www.thingiverse.com/thing:2191384 only it has the ability to insert a LED with a…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
This is basically the same as http://www.thingiverse.com/thing:2191384 only it has the ability to insert a LED with a cooler. It will be located in the jaw directly at the north pole of the imaginary sphere. These are the coolers I used: https://www.amazon.com/dp/B00NQ9NJCS. The LEDS are these, but similar ones will work also: https://www.amazon.de/gp/product/B00A092NY2
If your cooler has different dimensions you can adjust the size in the paramters in certain limits that do not break the design.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Notes:
I printed this slower and with higher resolutions than my previous versions, this is definitely a improvement! Also supports and rafts are not necessary for this model. Printed with 45mm/s in 23h 45min.
Scaling this makes no sense as then the cooler will not fit anymore. If you don't intend to use a cooler and LED you should use version 2.
Category: Math Art