Customizable Stereographic Skull v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Again big thanks to Joe Balint for suggesting to simply remove the corners for easier printing! This way I was able to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Again big thanks to Joe Balint for suggesting to simply remove the corners for easier printing! This way I was able to crank the resolution up to 100x100 pixels and have it still sliceable in Simplify3D!
Make sure to have no important detail on the corners, because it will be lost. How much detail is removed can be adjusted with the setting "corner cutoff", the default settings worked fine for me with printing at 100%.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.3mm
Notes:
Printed in 18h 16min at 60mm/sec.
The print is not perfect, probably a higher resolution or slower speed would give cleaner results.
Category: Math Art