HSW Caliper and CR2032 Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed a caliper and CR2032 battery holder for the honeycomb storage wall.
- Ocena
- 4,952 / 5
- Polubienia
- 901
- Pobrania
- 5447
- Wydruki
- 146
- Wyświetlenia
- 12 343
- Oceny
- 125
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at https://www.printables.com/model/152592-honeycomb-storage-wall
Print settings:
Print vertically.
Layer Height : 0.2
Perimeters: 4
Infill: 20%
Update 12/07/2022: Added version that can hold a single CR2032 battery for the calipers.
Install the battery into the holder with the + facing up. There is a circle indicator on the holder
I hope you enjoy printing the design! To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/Jungl3