Nest cam corner mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nest cam 2nd gen corner mount
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to mount my cam up high in a corner so I used a piece of wood at first and didn't like it so I made this nest cam indoor wired 2nd gen corner mount on tinkercad
You will need to drill your own holes for the cam base vertically that way once you attach it to the printed part the notches in the base will allow you to screw the part to the wall. Note that the holes I drilled are in the wrong location in the picture.
I just used small nuts and bolts to attach base to printed part, just make sure the bolts sit flush in the base or the cam wont go on. Hollow wall anchors are recommended. Its not prefect but its minimal and has ben working fine for me for a couple years now. I'm new to printables so I'm sharing here for anyone that might need one.