1 / 5
House Air Filter Retaining Clips
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cheap clips to retain a house-style air filter
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I swapped to a generic/cheap filter for the air return but the friction fit of the filter was a little loose in the opening. When the furnace stopped circulating air, the filter would fall onto the metal grate below and it was loud enough to bother the family.
After a couple weeks of noticing this, I figured cheap clips to hold the filter in place were a good enough stop gap.
Printed in PETG for flexibility, no supports.
Note: because of my poor cad, this shows up as 2 parts in the STL file… you should merge the parts in your slicer.