1 / 1
Copal 3s Lens Board for Foťák (Cambo compatible) — zdjęcie 1

Copal 3s Lens Board for Foťák (Cambo compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 4x5" Cambo compatible Copal #3s lens board from the Foťák project.

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
209
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

This is a Copal #3s lens board for a Foťák view camera, a slightly smaller version of Copal #3. Also compatible with Cambo Legend 4x5 and presumably other Cambo 4x5 view cameras. See the Pantarheon Foťák project (which is my project).

The board should be printed with black filament (PLA or PETg) that neither lets light through it, nor reflects any light back.

The flat side is the front, so you can mount the front lens element to it, so it faces toward whatever you want to take a photo of. The other side (where the text is, among other things) is where you can mount the rear lens element. When added to the camera, the rear element will be facing the camera bellows. Also, the text will be hidden from view when the board is mounted on the front camera standard.

PrusaSlicer 2.5.0 (and later, no doubt) can slice the .step file directly. For other slicers you may still need the .stl file, so I have enclosed it as well.

Please note that if you are looking for a Copal #3 (without the s) lens board, you can find it here.

Tagi