Snap-on pedal blocks for Assault Fitness Airbike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,88 € – 3,52 € netto (bez VAT)
Dla pliku: other pedal block_0.3mm_PETG_MK3S_2h43m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,20 € netto (środek widełek).
- Masa podana przez autora
- 54 g
- Czas druku podany przez autora
- 2,71 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
One inch pedal blocks, left and right, snap onto Assault Fitness Airbike pedals - no adhesive needed
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
When you need more than the seat post adjustment can provide, adding blocks attached to the pedals to bridge the gap. Don't pedal on your tiptoes, print some pedal blocks that snap onto your existing Assault Fitnesss Airbike pedals.
Printing - is an easy, support-free print. Infill - 25 or greater %, perimeters suggested = 3
After printing, slightly flex the center of the pedal towards the pedal hub (inwards) and firmly press. The pedal block will snap onto the nubs of the original pedal, and will hold the block on the bike without further need for adhesives.