Lid for 1 x 1 Gridfinity Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple lid to keep dust and debris out of your small parts box
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 130
- Wydruki
- 3
- Wyświetlenia
- 1000
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is just a simple box lid for the 1 x 1 gridfinity boxes. I needed this for a box containing grease which I didn't want to be contaminated. The lid is a fairly snug fit as I designed it to be pressed down into the top recess of the box so you may need to file the edges or try different print settings to get it to fit for your needs.
The version I printed for my box is a low profile lid but I have included a version with a gap in the handle section to be used to pry the lid out if you also have a snug fit.
If you want an easy loose fit you can scale it to 99% or so and that should work.