Bambu Lab X1 Next Gen. Purge / Flush / Poop Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the enlarged version of my other Poop-Bin: https://www.printables.com/model/285625-bambu-lab-x1-larger-poop-bin
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 539
- Wydruki
- 0
- Wyświetlenia
- 3226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is the enlarged version of my other Poop-Bin:
https://www.printables.com/model/285625-bambu-lab-x1-larger-poop-bin
in practical Use, it showed up that a larger Size is useful, and this time we go to the maximum size we can print.
The slicer Options must be used with care, for example Tree-Support will not work (See last picture). At least some critical support is needed to print this version. If have added some slicer files.
There are 2 improvements:
- Increased the height
- Made a cut to allow Filament rests to fall inside.
- Much stronger Floor and stronger walls
Printing time is here about 20 hrs. at 100% Speed, using “Fine Mode” and 3 Colors. The Printing time can possibly be reduced with optimized settings (Medium fine mode and adaptive Layer height) and using only 1 color.
HINT: This Object is perfect to use your “Filament Rests Spools” for it.
If the Filament is over, the Bambu will bring up a message and you can just insert the next “Rest”. As result you will get a multicolor-Bin like this one here (see pictures).