Vespa PX electrical box replacement, plain cover,
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover to cover the hole of the main engine block, where the wires of the generator run through.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cover to cover the hole of the main engine block, where the wires of the generator run through. Typically there is a special hinged box that covers the hole and has room for the connectors. I lost mine at some point, and as my wiring was custom anyways, I figured just covering the hole would be sufficient. Its hold in place by a zip tie but you can also use screws. Maybe I'll update to a more complex versions at some point.
Dont print this in PLA due to the high temperature of the engkne block. I printed mine in PETG and its working fine for already 3000 km.