First Aid Symbol Keychain / Zipper Tag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First aid kit keychain with 2 hole sizes for different sized rings. Scale up the larger one for more than 2 loops.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I keep a first aid kit in my backpack and wanted it to be obvious which compartment it was in so I designed this keychain / zipper tag to attach to the corresponding zipper on my backpack.
Ideally it is printed in 2 different materials with a simple filament switch after the upper section starts printing. I recommend printing with 3 walls, bottom and top layers and 75% infill. The entire thing only takes 2g of filament with these settings. At 0.2mm layer height there should be 25 layers and I've done my filament switch at layer 11, just after the upper walls start printing.
The dimensions are 25mm diameter, 5mm height. This is roughly the size of a british pound coin with double the thickness.