DNL Kaabo Mantis 10 Mudguard [std/wide, front/back]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer mudguard/fender for Kaabo Mantis 10. Front and back, standard and wide versions.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 298
- Wydruki
- 1
- Wyświetlenia
- 1873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing.
Longer mudguard/fender for Kaabo Mantis 10. Comes in variants:
- Standard (90 mm) | Wide (110 mm)
- Front | Back
Mudguards are longer than the original counterparts - especially the back mudguard is way longer, making it much more effective. Because of the length, the mudguards require extra support if you don't want them to snap. Also includes a damper spring protector part.
Hybrid metal support
There's a plastic support part that you can attach to the brake nuts, but I've been having issues with the plastic support not being strong enough, so I've also designed a separate hybrid metal support where one part (same for all variants) is laser cut from 2mm stainless steel.
Print config & hardware
Print config I've tested it with (I've included a 3mf file with the settings I'm using):
- PETG, 240 °C
- .6 mm nozzle, .3 mm layer height, .8 mm extrusion width
- 20% infill, 2 perimeters
You'll need:
- 4× M3x12 screw as a replacement for the short ones present with the default mudguard.
- 2× M5x16–20 screw + locking nut for attaching mudguard to the base
- 1× M5x12 screw + locking nut for attaching support to the mudguard
- If using the metal support, you'll need one extra M5×12 screw and nut.