Kistenberg Tager Organizer Cups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement/extra cups for the Kistenberg Tager organizer system. The system is quite nice and cheap, provides…
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 912
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Replacement/extra cups for the Kistenberg Tager organizer system. The system is quite nice and cheap, provides suitcases with small component boxes in it. I wanted more 1x1 cups instead of the 2x2 box provided, so I designed these.
There are two variants of the cup: one standard, one with diagonal separator. Both versions are intended to be printed in vase mode – I've been printing them with 1.5mm extrusion width with a .6mm nozzle and it turned out quite nice. Both versions also require the cupBase file to be printed separately (not in vase mode) and glued on the bottom of the cups.
I've also added a special smaller cup that fits into corners.