1 / 9
DNL Key organizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Key organizer for adjustable number of keys. Uses two M3 bolts to hold everything together. I use two M3x8 hex rivets…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 987
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Key organizer for adjustable number of keys. Usestwo M3 bolts to hold everything together. I usetwo M3x8 hex rivets on the bottom side - you don't have to have the M3 bolt exactly to the size with those. Supportless print.
Looks nice if you switch filament after a few layers.
How to put it together:
- Start with the "Bottom". Put a hex rivet through the upper hole.
- Stack up the keys on the rivet. Put "KeySpacer" between each two keys.
- Put on the "Top" and put in the M3 screw to hold the keys together.
- Put another hex rivet through the second slot.
- Stack enough "Spacers" on the second slot hex rivet so that the column has the same height as the keys column.
- Put the second M3 screw through the side hole from the top and tighten it all together.
Category: Accessories