MAMUT DX mounts for VRGM gun stock (magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2021-01-14: V3 - even more tolerance for magnets, made some cutouts so the magnet slots are deformable 2021-01-01: V2…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
2021-01-14: V3 - even more tolerance for magnets, made some cutouts so the magnet slots are deformable
2021-01-01: V2 - increased tolerance for the magnets
Mod for VRGM v2 VR gun stock – support for Mamut DX controller grips.
The mount goes where the lace clip originally was, the lace clip is moved a little lower into the slot in the mount. It holds quite firmly and provides more comfort for larger hands.
Two versions: one for 1× 20mm × 2mm magnet, one for 4× 10mm × 2mm magnet.
I recommend using the 20mm magnet for your front hand (because it can rotate and is more easy to mount on) and the 4× 20mm version for the back hand as it prevents rotation and is stronger.
For zero effort, print the SET_RECOMMENDED_10mmRight_20mmLeft.stl file.
Source file included, also included standalone rail and cup mounts if you wanted to make your own controller support.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: Gembird PLA Black
Notes:
Supports only from build plate
Category: Video Games