F1 Drill Jig Freeze Plug (requires hardware)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This jig or fixture was created to assist in drilling properly centered holes in 34.3mm automotive freeze plugs. This…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 195
- Wydruki
- 0
- Wyświetlenia
- 1456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This jig or fixture was created to assist in drilling properly centered holes in 34.3mm automotive freeze plugs.
This version requires the following hardware:
2x or 4x 1/4"-20 x 1-1/2" machine screws
2x or 4x 1/4"-20 hex nuts
5/8" diameter drill bushing (for desired drill size) with head
Jig includes 4x 1/8" holes for venting the plug, if desired.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.35mm
Infill:
20%
Notes:
3 shells/perimeters recommended.
Category: Tools