Cute 3D Nightlight Lighthouse For Nurseries and Childrens's Rooms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a lighthouse that features a base that can be used as a creative and fun lighthouse.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 647
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was inspired by the song “My Lighthouse” by the band Rend Collective and wanted to work on my 3d modeling skills. So I designed a lighthouse and then added a base that would make it function as a nightlight for a more creative light than your typical see-through cover. This replaces your typical cover on a nightlight and turns it into a fun home decor piece for nurseries or any bedroom in your house.
It features windows, railings, a sloped roof, and openings near the top for the light to shine through. The slot thickness is 1.65mm so it could work with any nightlights with that thickness, here are the ones that I used-
https://smile.amazon.com/dp/B01LQX0BXA/ref=emc_b_5_t
Print Settings-
Use a .4mm nozzle with .2mm layer height, 2 perimeters 20% infill, or increase the perimeter count with 0% infill. It only needs support near the cutout where the slot is.
Can be printed on an SLA or FDM printer. Pictures shown were printed with a MSLA printer.