Printable Case for Datto ALTO 3 V2 NUC Board and SSD.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement case for the Datto ALTO 3 V2. Almost exactly the same size as the original case.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a printable case for the board from a Datto ALTO 3 V2. If for some reason you have one of those boards without a case, this is a functional equivalent of the original case, but made to be 3D printed.
I see that more recent Asrock NUCs have very similar looking cases. I have no idea if this case will fit those.
I really just did this to validate the dimensions of my model of the board, as I intend to use the board in a larger project and I wanted to make sure I got all the dimensions right.

There's are some panels that could be laser cut from 3mm acrylic.
The case is intended to be assembled with m3 screws or #4 self tapping screws. The screws are intended to be 8mm long.
There's also a version of some parts that have holes of an appropriate size for heat inserts in the outer case. There are several parts where there's just not enough room to use inserts. But the other case panels can be assembled with heat inserts. I used heat inserts Amazon #B09KZSJS88 .




It's a tight fit with the SSD, but really not much tighter fit than the original case.



