Another Can Holder (D 67.5mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pressurised air can holder (D 67.5mm)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have switched from SketchUp to OnShape so I have played with some of my remixes because I needed another pressurised can holder without the supports or edges (this time with interior diameter of 67.5mm). This will be fixed also directly to the wall or furniture.
Model is from from Olo Deepdelver, redesigned and remixed in OnShape. Because working with STL in OnShape is a nightmare, I just recreated the model from his design.
I added some holes, the model seems more resistant now (I damaged some prints) but at the same time the consumption of material and the printing time almost doubled.
2x4mm holes needed on the wall/furniture.
The size of the STL file is huge, probably because I am a beginner in OnShape. The good part is that no errors appear when slicing :)