LITHOPHANE LAMP LED BY HOKUSAI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Material: PLA Raft: No Resolution: 0.2mm Temperature: 220 ° C Support: No Fill: 50%
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 1028
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this led box for lithography by taking 4 works by hokusai.
But you can decide to use any image as long as you respect the following measures 100 mm x 75 mm x 3 mm.
Products :
I used the leds: OUSFOT LED STRIP LIGHT model: YX-5050-30D
Assembly:
For assembly, just glue the led strip around the central pillar and make the electrical connections, and pass the cables inside the pillar.
Remember to take the remote control sensor cable and pass it inside the pillar and pull it out, so as to allow the signal to function correctly.
Fix the power supply in correspondence with the hole with hot glue, so as not to move and to allow the connection of the power cable.
Secure the base and the lid with simple Attak glue.
For any problems, I'm here