1 / 1
Motor shaft adapter from 3mm (3.125mm) to 5mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used to put gears made for 5mm axles on 3mm axle Motors
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 325
- Wydruki
- 1
- Wyświetlenia
- 1168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
This is an adapter for 3.125mm to 5mm axles. To print it I recommend to start with default settings and increase/decrease flow depending on how well it fits (optimally it wouldn't have any noticeable play).
There are three versions:
- Just a cylinder
- With hole for grubscrew
- With hole for grub screw and flat spot
The durability seems to be very good, as my RC speed tank uses pretty strong motors and I never had a problem with these printed of PLA.
The material doesn't really matter, but be aware of shrinking for materials like abs.