Swiveled ECAS or M10 Entry for Auto-Rewind Spool Holder for RepRack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds support for attaching a PTFE reverse bowden tube directly to the spool holder
- Ocena
- 4,75 / 5
- Polubienia
- 55
- Pobrania
- 193
- Wydruki
- 5
- Wyświetlenia
- 1664
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Combines the best of the Auto-Rewind Spool Holder for RepRack by Jerrari with the Enraged Rabbit Carrot Patch by Ette to allow you to connect a swiveled PTFE tube to be attached directly to the spool holder. This helps a lot if you need to connect a lot of spools at once to a single printer (I use a 12 material Enraged Rabbit Carrot Feeder).
Print one filament guide swivel (auto-rewind-spool-holder-for-reprack-filament-guide-swivel.stl) and either an ECAS or M10 entry module depending on what you prefer. Attach the entry module to the swivel by threading through a short piece of filament. Maybe add some CT/superglue for good measure and cut it flush with a flush cutter for extra points.
See picture for a few assembled ECAS examples.