Geocaching container w PET-cork
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
?? Im sorry that there is no ThingiView on the models, so you cannot actually see the magnet and eyelet variants…
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 226
- Wydruki
- 4
- Wyświetlenia
- 1289
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
??
Im sorry that there is no ThingiView on the models, so you cannot actually see the magnet and eyelet variants online, anyone know how to fix that?
I have made a couple of variants on the same theme; a watertight small geocaching contaier that closes with a PET-bottle cork from a soda bottle (Fanta, Cola etc).
Four variants are available in two sizes each:
- just a container
- container with eyelet for hanging a cache
- magnet mount at the end of the container
- strong dual magnet mount on the side of the container for mount on a flat metal surface
Inner diameter is 21.5 mm
Inner length is 82 mm for the big one and 52mm for the small one
The size of the magnets are 3x12 mm
Print Settings
Printer:
Ender 3 pro
Rafts:
No
Supports:
No
Resolution:
0.4 nozzle, 0.10 and 0.20 layer height
Filament:
AddNorth PETG
Notes:
I would recommend printing with 0.2mm layer height for the first layers and the finish off with 0.1mm layer height for the thread at the top
Category: Sport & Outdoors