Modified Repwinder spoool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of repwinder spool stand - for use in drybox or as an alternative to prusabox spool holder.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 1046
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Modification of repwinder spool stand - for use in drybox or as an alternative to prusabox spool holder. The holders can be placed next to each other with no space betwen them. They can be joined together by clips. They can be used with the prusabox spool center, or simply with the axe (8mm tube). I made only one yet, but I am ready to print five. My Thanks to Pooch for really good idea of simple holder.
The files contain 1) modified stand, 2)clips, 3) two types of axe holders (end holder and double holder) and 4) two types of crossmembers - PM spools or Prusa spools. I could make only one size, but I preffer variability a possibility of saving as much space as possible.
Length of axis for the wide variant is 110 mm, for the slim variant it is 87mm.
The wide variant can use spool center: Prusa_MMU_enclosure_10.3mf , the files you can find here: https://blog.prusaprinters.org/mmu2s-printer-enclosure/#_ga=2.137778032.199629368.1588230571-748081994.1588230571