Water Bottle to Shower, Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,76 € – 0,93 € netto (bez VAT)
Dla pliku: PETG auf PrusaXL / watering-bottle-improved_prusaxl_04n_02mm_petg_xlis_53m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,85 € netto (środek widełek).
- Masa podana przez autora
- 10 g
- Czas druku podany przez autora
- 52,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
You like to go hiking, or you want to prepare for the upcoming #Blackout? Use any empty water bottle as shower.
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 677
- Wydruki
- 12
- Wyświetlenia
- 2555
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
You like to go hiking, or you want to prepare for the upcoming #Blackout?
Use any empty water bottle as shower.
This Model is an improved Version of:
https://www.printables.com/model/199270-watering-bottle-cap
After printing the above Model using PLA, it broke immediately when i tried to remove it from the Printing plate. So i made this stronger version that may still break - but should not break immediately. Best print it with PETG and at least 60% Infill.
Also I have added the STL-File of a Version that has only 1 hole in the Center.
Be careful when removing it from the Plate and also when removing the Supports.
Some critical supports are needed.