SpinRings - Fidget Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on the classic spherical rings spinner but with subtle tweaks.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 161
- Wydruki
- 2
- Wyświetlenia
- 835
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SpinRings are my take on a classic 3D printed design. A series of concentric spherical rings that print as one piece, interlocking and spinning inside of one another.
My version, built in Shapr3D, features a couple of small tweaks. First the outer ring has a concave surface making it easier to grip. This concave edge also allows the SpinRings to stand on their edge and roll. Finally you will find a small divot in the centre piece making it easier to locate the middle of the SpinRings by touch.
Prints fine with a 0.4 or 0.6 nozzle, standard PrusaSlicer settings. The 0.3mm tolerance between the rings should not cause problems, I've printed tons with zero stuck.