1 / 1
MK3S and MK2.5S Bear Copperhead Groove and Screw Mount Extruder — zdjęcie 1

MK3S and MK2.5S Bear Copperhead Groove and Screw Mount Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This extruder is a remix of the Bear Extruder for the Copperhead hot end made by Slice Engineering.

Ocena
0 / 5
Polubienia
6
Pobrania
107
Wydruki
0
Wyświetlenia
1459
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This extruder is a remix of the Bear Extruder for the Copperhead hot end made by Slice Engineering. I made models for both the groove mount and screw mount variants and will fit the MK3S and MK2.5S. If you are looking to buy a Copperhead hot end, I would recommend getting the screw mount variant and using the T-Attachment component. This locks the hot end in place to prevent it from rotating. Assembly is the same as the bear extruder, except you will be using a hex nut in place of one of the square nuts.

Groove mount
Print the following files:
Groove Mount Extruder Body
Groove Mount Extruder Cover
Either the MK3S or MK25S X Carriage
Fan Shroud

Screw Mount
Print the following Files
Screw Mount Extruder Body
Screw Mount Extruder Cover
Screw Mount T-Attachment
Either the MK3S or MK25S X Carriage
Fan Shroud

Tagi