Unifi Protect G4 Instant Camera Mount 22.5 Degrees Rotated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unifi Protect G4 Instant Camera Mount 22.5 Degrees Rotated, Cable Passthrough
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 1380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to mount a new Unifi Protect G4 Instant Camera on a wall, but I need the camera turned to view sideways along the wall.
I found a suitable wall mount on Thingiverse by darklis: https://www.thingiverse.com/thing:5393420
Unfortunately, the 22.5 degree angle on that mount was pointed in the wrong direction for my needs. Therefore, I rotated the top by 90 degrees. I also added a cable channel for the USB power cord to run out the side. I recommend adding supports for this section as my print sagged a bit over the channel. I eventually cut out the sagging bits as I didn't need them for my application.