Printrite horizontal spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printrite horizontal spool holder
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 128
- Wydruki
- 5
- Wyświetlenia
- 677
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
NEW: There is now a smooth variation of the spool holder. I have been using it for a long time but i forgot to upload it :( The original version with steps does not work as well as the smooth one.
This is a spool holder for the printrite diy printer that mounts on the screws holding the vertical rods on top of the printer. It has a universal design so it should fit most spools. It uses two regular skateboard bearings to achieve a friction-free spinning.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
20%
Notes:
Prints in two parts: the mount and the holder.
Post-Printing
Assembly
Install two bearings to the holder from top and bottom. (should be a snug fit)
Push the holder on to the mount. (the mount might need some sanding)
Screw to the printer.
Enjoy! =)