Threaded PG9 and PG7 Gland Inserts for 3/4" Conduit Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert for 3/4" conduit boxes that is threaded for PG9 and PG7 glands. When used with a Type C conduit box…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is an insert for 3/4" conduit boxes that is threaded for PG9 and PG7 glands. When used with a Type C conduit box and PG9 gland, it makes a great outdoor case for a Sonoff basic. The box is commonly found in the electrical section of hardware stores and the glands can be found cheap online. If printing in ABS, you may want to scale the print 2% to account for shrinkage.
Print Settings
Printer:
VORON 2.1
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
40
Notes:
If printing in ABS, make sure to scale your print accordingly. +2% worked well for the filament I was using.
Category: DIY