Ender 3 S1 Series Bed Leveling Wheel Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the idea of HomeGrown3D I have designed these clips. Unfortunately the ones for the Ender 3 do not fit.
- Ocena
- 4,462 / 5
- Polubienia
- 207
- Pobrania
- 1246
- Wydruki
- 15
- Wyświetlenia
- 7200
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Problem:
Especially after printing at higher speeds, I slowly noticed that the leveling was getting worse and worse. Of course, this could be quickly fixed with ABL, but it still felt not right.
Solution:
I search for possibilities, also found the silicone spacers (which I ordered…).
And so I stumbled upon the design of HomeGrown3D.
Unfortunately, these did not fit for the Ender 3 S1 and so I desigend this one.
UPDATE:
Added a version for pro / standard
Material: PETG
Nozzle: 0,4
Layer height: 0,16 (works also with 0,2)
Infill: 20%
Print speed: 50mm/s
Print time: 37min
No support needed
Importend:
If you have an S1 or Pro, you will also need the cover for the dial in addition to the bracket.
Mounted it should look like this (make don by Andrew Oliinyk
@AndrewOliinyk_682368)
