Raspberry Pi 3 Case - No Screws - Homeseer Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 3 case with the Homeseer Logo. I'm switching from OpenHAB to Homeseer, so I needed a new cover for my…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Raspberry Pi 3 case with the Homeseer Logo.
I'm switching from OpenHAB to Homeseer, so I needed a new cover for my Raspberry Pi!
Aside from the logo, it's the same as my OpenHAB case design, and you can see the comparison between the two covers on the third photo.
TinkerCAD Links:
Top with Homeseer Logo: https://www.tinkercad.com/things/gDreZiwQBg1-raspi3-homeseer-logo
Bottom: https://www.tinkercad.com/things/lo2paEuiXlD-raspi3-bottom/
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
20%
Notes:
works best for me with top and bottom layers being at least 0.5 mm thick. So at 0.1mm layers, use five layers top and bottom.
Printed in PETG, which makes for a really nice snap-action.
Nozzle: 245
Bed: 75
Chamber: 35
40mm/s
Post-Printing
To deal with stringing, hit the little plastic hairs with a heat gun. They will curl up and be much easier to remove.
Category: DIY