Air Freshener Box for Tesla
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air freshener box to be slide into the air vent of Tesla Model 3 or Model Y
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 354
- Wydruki
- 3
- Wyświetlenia
- 3349
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple air freshener box with two halves to be snapped together. You can DIY air freshener using baking soda and essential oil mix (tons of recipes online), wrap that with tissue paper or non-woven fabric cut from a disposable mask (easy to find nowadays), and put it in the box.
The box can be slid into the air vent slot. Ideally, it should be the right fit. The box has a height of ½ inch (12.7 mm), which should be approximately the height of the air vent slot. However, we all know Tesla's build consistency is lacking so you may find the box too loose or too tight - on my car the box is too tight for the left ⅓ of the air vent and too loose for the right ⅓, but it fits mostly OK for the section behind the screen. So you want to measure the height on your Tesla and experiment with scaling of the model.