1 / 1
Core A8 Slim 25mm With Margin
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 25mm version did not fit my 25x25mm aluminum square tubing and the 25.4mm version was to loose. I saw a comment on…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The 25mm version did not fit my 25x25mm aluminum square tubing and the 25.4mm version was to loose. I saw a comment on the 25mm version with someone else having this same problem so I thought i would upload my fix for that.
This version adds a 0.25mm margin to all sides of the square tubing cut out. At least with my printer this results in a very good fit.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3
Infill:
20
Filament: add:north PETG
Category: 3D Printer Parts