1 / 6
Connector for th SHH!ot silencer for the PP700S-A airgun. — zdjęcie 1
1 / 6

Connector for th SHH!ot silencer for the PP700S-A airgun.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made the SHH!oot silencer (https://www.thingiverse.com/thing:4552394) for my 4,5mm Artemis PP700S-A airgun only to…

Ocena
5 / 5
Polubienia
5
Pobrania
63
Wydruki
1
Wyświetlenia
763
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made the SHH!oot silencer (https://www.thingiverse.com/thing:4552394) for my 4,5mm Artemis PP700S-A airgun only to find out that the silencer didn't fit. Close inspection of the original photos also showed a different muzzle on the airgun than mine has.

So i set out making a connector for my 4,5 mm 14mm diameter threadless muzzle (see images) to the silencer. It works like a charm. No glue is needed between the gun and the connector. Glue IS needed between the connector and the silencer. I dont know if it fits 5,5mm variants without threaded muzle, but i have made the bore large enough in case it does fit.

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0,2

Infill:

doesnt matter

Filament: 3de Premium PLA Black Post-Printing =============

Remove supports, slide onto muzzle (tight fit, slight convincing with a small hammer is needed) apply glue to the silencer and connector and mate them. Use a ruler or other straight item, to adjust any deviation of the suppressor from the bore line before glue sets.

Wait for glue to set. Have quiet(er) fun shooting you airgun.

Category: Sport & Outdoors

Tagi