Loft Lighting (Joist) Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To fix strip lights at the apex in a loft or beamed roof/ceiling with a 45deg central web opening (22.5deg pitch)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This build is to allows you to mount a strip light within a loft space, at the apex of the frame and between the central webs (with or without stringers). Two mounts are required per strip light, but they can be aligned with joists rather than the end of the strip lights. Made from PETG because lofts can be more humid and so more like an external installation.
The mount will fit a standard central apex with webs set at 45deg (22.5deg to the vertical). Accepts a screw penetration of 25mm. Strong enough to take pretty much any strip light - but I used LED's.
Build with the mount points on the plate.