Quarter Pounder - Extra Beefy (Hammer - Mallet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rebuild of my original Quarter Pounder (https://www.thingiverse.com/thing:4830422). I found that the handle…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 245
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a rebuild of my original Quarter Pounder (https://www.thingiverse.com/thing:4830422). I found that the handle was a little wimpy and would break off the head. This is a stronger (extra beefy) version. The head can be filled with coins (US quarters, nickels, dimes, pennies), BB's, lead shot, nuts, washers, or whatever. I also redesigned it to be easy to print without support. I would suggest at least 3 walls, tops, and bottoms with at least 20% infill. This won't drive nails but it makes a really nice non-marring tap hammer or meat mallet. I use mine to gently whack prints off my glass bed. I'm not patient enough to wait for them to cool off. ENJOY. Update. I added a new head that is double the thickness of the face.
Category: Tools