RC Airplane Pool Noodle Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm in the process of building an RC Airplane with the fuselage made from a pool noodle. I needed some landing gear…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I'm in the process of building an RC Airplane with the fuselage made from a pool noodle. I needed some landing gear wheels so I sliced some discs and printed a hub. Slice the pool noodle 15mm thick. The hole in the middle is 3mm. I used coat hanger wire to put it together. The hub will snugly pop in. I thought I was being inventive. I stumbled across a FliteTest video on YouTube where they did the same thing (8 years ago). They used water bottle caps for hubs. I think mine look nicer.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.32 mm
Infill:
100%
Filament:
Generic PETG
Notes:
I printed it with no supports and it turned out ok. I printed it with supports just on the build plate and it looked better. You do you.
Category: Hobby