Kersey Fabrications Speed Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a large speed test so that the printer can get up to speed for direction changes. Other tests I found on…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 323
- Wydruki
- 3
- Wyświetlenia
- 1574
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This is a large speed test so that the printer can get up to speed for direction changes. Other tests I found on Thingiverse were too small to really test full-speed printing.
Included in this test are:
- Straightaways
- Curves
- Overhangs
- Embossed Text
- Debossed Text
To setup the print for proper speeds, use the Cura "ChangeAtZ" post processing plugin. I triggered on height 10, 20, 30, 40, 50, 60, 70, and 80mm. If you set the start speed at 40mm/s, you can increase the speed in 25% increments to get to the final speed, 125%, 150%, etc.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament: FilamentOne PLA Blue
Category: 3D Printing Tests