Ender 5 Linear Rails Mod (Updated: 2021/12/03)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update Dec. 3, 2021: New design upload was long overdue. Almost all of the parts have received a revision. This will…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update Dec. 3, 2021:
New design upload was long overdue. Almost all of the parts have received a revision. This will give you full build plate use and works extremely well!
These are all of the printed components to mod the Ender 5 to use linear rails. I made this as minimalist as possible in order to not need to buy a lot of extra components and to avoid extra flex.
Hardware:
- 3 x 300mm Linear Rails with MGN12H Block
- 6 x GT2 Idler Pulley 20 Teeth 5mm Bore
- 36-ish x M3 Slide in T Nuts OR M3 Hammer Head T Nuts
- 42-ish x M3x8mm Screws
- 6 x M5x20mm Screws
- 2 x M4x35mm Screws
Please see my video series on this mod:
Part 1: https://youtu.be/tf8bVFscOOM
Part 2: https://youtu.be/zYssU7fBEEk
Part 3: https://youtu.be/tO1P2wx0L1Y
Latest Update: https://youtu.be/YVEKWypxyGo
(Amazon Links are Affiliate Links)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
50%
Filament: Any HTPLA
Category: 3D Printer Parts