Woodstock in MK3S Spinning Gyroscope as Test Pilot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I am not sure if this is worth a remix, but since I can not upload a .stl file to a comment, I made one.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I am not sure if this is worth a remix, but since I can not upload a .stl file to a comment, I made one.
I just used the Woodstock figure from https://www.thingiverse.com/thing:2463449/files -
thanks to the creator, Misterdid. I copied the license from his thingiverse entry.
To achieve a print without supports, I made some simple slic3r scale and cut operations, keeping W. deliberately off balance to let him eventually dance a little more "grounded". The 2 halves must be glued together. The assembled figure was then hotglued into the inner ring of the gyroscope.
Print instructions
My print was made from PLA with a 0.4 mm nozzle, 0.07mm layer height - it is a very small object and looks nice this way.