JSAUX HB0603 SteamDeck Dock Air Intake Fix Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is for two clips to be printed on both sides of the JSAUX HB0603 SteamDeck dock to increase the height of…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 1163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This model is for two clips to be printed on both sides of the JSAUX HB0603 SteamDeck dock to increase the height of the Steamdeck.
The existing design of the JSAUX HB0603(and earlier models) prevents airflow from about 25%-30% of the air intake on the back of the SteamDeck. This can cause overheating, or poor performance while docked.
There are two models, one is meant for PLA and one is meant for TPU. The only difference is that the TPU model is scaled on Y axis to 102% - to make it fit more snuggly. Of course, tolerances will vary, but my prints came out snug enough to not need to adhere the clips to the dock.
Print Settings
Supports:
No
Resolution:
.2
Infill:
20%
Category: Toy & Game Accessories