Clock escapement system (simple)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rough model of a clock escapement system.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a clock escapement system I designed since I was bored. It is not the best and is a little hard to get going, but is an easy to understand and a quick print for those who want to learn, teach, or want to built of of it.
It does need a pen casing, hot glue, and a quarter for the assembly and counter weight, as well as some string/rope with weights to run the mechanism.
It is meant to spin clockwise and there mazy be a difference in the photos and the lever arm file, I fixed the sizing.
Please comment if the file is not working in any way or form and I'll see what I can do.
(edit) the pendulum length and weight must be adjusted to time the movement properly, if not the movement may run sporadically or extremely unaccurate.