S10 Dome Light Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removed the Chevy bowtie so that I could print flat on the bed. I printed with zero bottom layer and used the 'gyroid'…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Remixed from https://www.thingiverse.com/thing:4372110
Removed the Chevy bowtie so that I could print flat on the bed.
I printed with zero bottom layer and used the 'gyroid' infill at 15% to get the pattern on the outside face.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20
Filament:
translucent blue
Notes:
Suggest using tree supports for the lock tabs so that the support base can be farther from the model. I used regular supports and due to the very small overhang, it required some cutting/sanding to clean up where the supports fused with the model
Category: Automotive