EVA3 Tensioner-less Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super simple Tensioner-less version of the EVA3 corexy backplate. For use with front idler tensioners.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 287
- Wydruki
- 1
- Wyświetlenia
- 1475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I installed a front-idler tensioner mod on my RatRig VCore3, and wanted to remove the pesky backplate tensioners from my carriage, so I whipped this super simple version up in OnShape. Literally just flattened out the backplate, and arranged the belt grooves and mounting holes for the normal front belt grabbers.
I went looking for something like this before starting on my own, but all I found were backplates designed for full carriage reworks, or intended for mounting toolplates or the like. I just wanted the most barebones drop-in replacement for my existing backplate.
I checked all of the official cooling inlet models, and they all should still work with this backplate, but if something seems amiss don't hesitate to let me know!